Description:

			Mastering grade 24-bit/192kHz converters - the same A/D converters used in Digidesign's flagship ProTools HD 192 I/O Interface delivering an amazing 120dB signal-to-noise ratio
			The ultimate portable system - for recording, editing, mixing and virtual instruments - use the E-MU 02 CardBus Card alone for its hardware-accelerated effects and premium stereo headphone/line output or together with the MicroDock M for complete analog and digital I/O flexibility
			Hardware-accelerated effects - over 600 standalone and E-MU Power FX VST plug-in effects with no CPU overhead
			PatchMix™ DSP zero-latency hardware mixing and monitoring - with super-flexible patchbay - no external mixer needed
			Ultra-portable MicroDock M offers 16 inputs/16 outputs plus MIDI I/O - everything from balanced analog and turntable inputs to ADAT and S/PDIF (switchable to AES/EBU)
			Two E-MU XTC™ studio-grade, ultra-low noise preamps (-127dBu EIN) with analog soft limiter - Mic/Line and true Hi-Z inputs via Neutrik connectors, 48V phantom power and 60dB of gain
			Compatibility with most popular audio/sequencer applications - ultra-low latency 24-bit/192kHz ASIO 2.0 and Stereo WDM drivers
			E-MU Production Tools Software Bundle - includes Cakewalk SONAR LE, Steinberg Cubase LE and Wavelab Lite, Ableton Live Lite 4 for E-MU, IK Multimedia AmpliTube LE and T-RackS EQ, Minnetonka diskWelder BRONZE, SFX Machine LT, plus E-MU's Proteus X LE Desktop Sound Module - everything you need to create, record, edit, master and burn is in the box

			Two E-MU XTC™ Ultra-low Noise Mic/Line/Hi-Z Preamps with Soft Limiter and 48V Phantom Power (-129dBu EIN)
			Four 1/4" Balanced Inputs
			Six 1/4" Balanced Outputs
			Turntable Input (w/ground lug and hardware RIAA preamp)
			24-bit/192kHz ADAT In/Out (switchable to S/PDIF)
			24-bit/192kHz coaxial S/PDIF Out (switchable to AES/EBU)
			Two sets of MIDI In/Out
			stereo 1/8" Speaker Outputs (configurable from stereo to 5.1)
			Two Stereo Headphone/Line Outputs (one on card, one on MicroDock M)

Stereo Reverb Lite Reverb Compressor Leveling Amp Chorus Flanger Phase Shifter Frequency Shifter Distortion Speaker Simulator Rotary Speaker Auto-Wah Vocal Morpher 1-Band Para EQ 1-Band Shelf EQ 3-Band EQ 4-Band EQ Mono Delay 100 Mono Delay 250 Mono Delay 500 Mono Delay 750 Mono Delay 1500 Mono Delay 3000 Stereo Delay 100 Stereo Delay 250 Stereo Delay 500 Stereo Delay 750 Stereo Delay 1500

Specifications:

General

			Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
			Bit Depths: 24 bit I/O, 32 bit processing
			CardBus Card Specification:
			- Form factor: PCMCIA Type II - Bus-Mastering DMA subsystem reduces CPU usage
			E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
			Hardware-accelerated, 32 channel mixing, and multi-effects processing
			Zero-latency direct hardware monitoring w/effects
			ASIO 2.0, Stereo WDM/MME/DirectSound Drivers
			EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable
			Anti-Pop speaker protection minimizes noise during power on/off
			-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Combo Microphone Preamplifier/Hi-Z/Line Inputs (2)

			Type: E-MU® XTC™ combo mic preamp and Hi-Z/line input w/ Soft Limiter
			Gain Range: +60dB
			Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB
			Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB
			Hi-Z Line Input:
			- Input Impedance: 1Mohm - Max Level: +18dBV (20.2dBu) - Dynamic Range (A-weighted, 1kHz, min gain): 118dB - Signal-to-Noise Ratio (A-weighted, min gain): 118dB - THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%)
			Microphone Preamplifier:
			- Input Impedance: 1.5Kohms - Max Level: +6dBV (+8.2dBu) - EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu - Signal-to-Noise Ratio (A-weighted, min gain): 119dB - THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%) - Phantom Power: 48V - Soft Limiter: 5dB max compression (software selectable)

Analog Line Inputs (4)

			Type: servo-balanced, DC-coupled, low-noise input circuitry
			A/D converter: AK5394A
			Level (software selectable):
			- Professional: +4dBu nominal, 20dBu max (balanced) - Consumer: -10dBV nominal, 6dBV max (unbalanced)
			Frequency Response (20Hz-20kHz): +0.0/-.03dB
			Dynamic Range (1kHz, A-weighted): 120dB
			Signal-to-Noise Ratio (A-weighted): 120dB
			THD+N (1kHz at -1dBFS): -110dB (.0003%)
			Stereo Crosstalk (1kHz at -1dBFS): < -120dB

Analog Line Outputs (6)

			Type: balanced, AC-coupled, 2-pole low-pass differential filter
			D/A converter: CS4398
			Level (software selectable):
			- Professional: +4dBu nominal, 20dBu max (balanced) - Consumer: -10dBV nominal, 6dBV max (unbalanced)
			Frequency Response (20Hz - 20kHz): 0.0/-.06dB
			Dynamic Range (1kHz, A-weighted): 120dB
			Signal-to-Noise Ratio (A-weighted): 120dB
			THD+N (1kHz at -1dBFS): -105dB (.0006%)
			Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Headphone Amplifier (2 Stereo: MicroDock M and Card)

			Type: linear power amplifier
			D/A converter: CS4398 (dock), AK4396 (card)
			Gain Range: 85dB
			Maximum Output Power: 50mW (dock), 20mW (card)
			Output impedance: 22ohms
			Frequency Response (20Hz-20kHz): +0.0/-0.07dB
			Dynamic Range (A-weighted): 118.5dB (dock), 115dB (card)
			Signal-to-Noise Ratio (A-weighted): 118dB (dock), 115dB (card)
			THD+N (1kHz, max gain): 600ohm load: -96dB (dock), -96dB (card)
			Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB

Phono Input (stereo)

			Type: RIAA equalized phono input
			Maximum level:
			- Professional: 60mV RMS - Consumer: 15mV RMS
			Input impedance: 47Kohm
			Frequency Response (20Hz - 20kHz): +0.1/-0.3dB
			Dynamic Range (A-weighted): 96dB
			Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB
			THD+N (1kHz, 15mV RMS input): -90dB (.003%)
			Stereo Crosstalk (1kHz at -1dBFS): < -80dB

Digital I/O

			S/PDIF:
			- 2 in/2 out coaxial (transformer coupled) - 2 in/2 out optical (software switched with ADAT) - AES/EBU or S/PDIF format (software selectable)
			ADAT:
			- 8 channels, 24-bit @ 44.1/48kHz - 4 channels, 24-bit @ 88.2/96kHz (S-MUX compatible) - 2 channels, 24-bit @ 176.4/192kHz
			MIDI
			- 2 in, 2 out

Synchronization

			Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz
			External sample rate sync via
			- ADAT (44.1 - 192kHz) - Optical S/PDIF (44.1 - 96kHz) - Coaxial S/PDIF (44.1 - 192kHz)

Retail Box Contents

			E-MU 02 CardBus Card
			E-MU MicroDock M
			EDI (E-MU Digital Interface) cable (1 meter)
			Universal power adapter
			MIDI breakout cable
			CardBus Card carrying case
			Quick Start installation guide
			E-MU Digital Audio Systems CD-ROM
			- Windows 2000 and XP Drivers - E-MU PatchMix DSP - E-MU Power FX - E-MU E-DSP Effects Library - Owner's Manual and Tutorials
			E-MU Production Tools Software Bundle CD-ROM
			- Cakewalk SONAR LE - Steinberg Cubase LE - Steinberg Wavelab Lite - IK Multimedia AmpliTube LE - IK Multimedia T-RackS EQ - Minnetonka diskWelder BRONZE - SFX Machine LT - E-MU Proteus X LE (over 1000 sounds included)

Minimum System Requirements:

			Intel® or AMD® processor - 1 GHz or faster
			Intel, AMD or 100% compatible motherboard & chipset
			Microsoft® Windows® XP (SP 2) or 2000 (SP4)
			256MB System RAM
			900MB of free hard disk space for full installation
			Available Type II CardBus slot (PCMCIA slot)*
			CD-ROM/CD-RW or DVD-ROM drive required for software installation
			XVGA Video (1024 X 768)

*Simultaneous input/output channel count may vary depending on the PCMCIA controller in your system. 

Tested Laptop Systems:

Laptop	PCMCIA Controller
IBM ThinkPad T40 (X5650)	Texas Instruments CardBus RACEway
Compaq Presario 2100 (X5628)	O2 Micro OZ 6912/711E0
Dell Inspiron 600m (C13102) Laptop	O2 Micro 0Z711ECI Smart Card Bus
HP Pavilion zv5000 1.5 Ghz	TI PCI-1520
IBM Thinkpad T23 1.2 Ghz	TI PCI-1420
IBM Thinkpad A22P Pentium III 933MHz Laptop	TI PCI-1450
Dell Latitude (X5502) Laptop	TI PCI-1420
Sony Viao PCG-V505EX	Ricoh R/RL/RT/RC/5C475(II), R5C520
NEC VERSA LXI (X5138) Laptop	TI PCI-1450
HP pavilion N5310 Intel Celeron 750MHz (X5140)	TI PCI-1420
Toshiba A75 (X5953) P4 2.8 GHz Laptop	ENE Technology CD-1410

(Performance depends on many variables, including PCMCIA controller, RAM, system configurations, etc...)

*All tests were performed on Windows XP (Service Pack 2) or Windows 2000
(Service Pack 4)

To check the PCMCIA controller in your system, please do the following:

For Windows XP and Windows 2000

	1:		Click Start -> Control Panel/System
	2:		When the System Properties window appears, click the Hardware tab
	3:		In the Hardware tab, click Device Manager
	4:		In the Device Manager, double click the PCMCIA adapters
	5:		Check the PCMCIA controller model
	6:		Close the Device Manager, System Properties and Control Panel to exit.

Latest Drivers/Applications/Documents
Always update your system with the latest software for improved features and functionality.

To get the latest driver/application/document updates for your 1616/1616M product go to http://www.emu.com/support/

Check the documentation that came with your laptop to find out how to get the latest BIOS and driver updates for your particular system.