4x4 mobile USB Audio/MIDI interface with Preamps.
MODEL- 9900-41076-00 VENDOR- M-AUDIO FEATURES- Fast Track Pro 4 x 4 Mobile USB Audio/MIDI Interface with Preamps. The Fast Track Pro delivers all the mobile recording flexibility of the Fast Track USB, plus even more professional features. You get 2 front-panel mic/line inputs complete with phantom power for condenser microphones, inserts for outboard effects balanced and unbalanced analog outputs, S/PDIF digital I/O, MIDI I/O, and more. Fast Track Pro also features near-zero latency direct hardware monitoring and low-latency ASIO software monitoring, plus an A/B source switch and dual output pairs for DJ-style cueing. Fast Track Pro is compatible with most popular PC and Mac music software. USB connection and bus power along with class compliancy for Mac OS X make it a breeze to set up. * Professional Recording--Anywhere, Anytime Fast Track Pro is designed to let you record with professional results whenever and wherever you want. A single USB connection gives you access to all the I/O you need for microphones and instruments like guitars, as well as MIDI- and S/PDIF-equipped digital audio gear. The microphone inputs are even phantom powered to accommodate the studio-quality condenser microphones like the M-Audio Luna and Solaris. Our time-tested driver software gives you total routing control over the 4 x 4 I/O-- including setting up an effects loop with external devices. * Monitoring Galore One of the hallmarks of a great audio interface is its monitoring flexibility--and Fast Track Pro delivers. Fast Track Pro features a powerful headphone amp with volume control. Hardware direct monitoring eliminates the latency or delay inherent in even the best internal circuitry while listening to your input and existing tracks. You can also listen to your input complete with effects while recording by using extremely the low-latency ASIO monitoring we ve perfected over the years. Two pairs of analog outputs let you connect to a DJ mixer and use the front-panel A/B source switch to audition cues. * GT Player Express Fast Track Pro ships with GT Player Express software, delivering a variety of effects and virtual stomp boxes that eliminate the need for a guitar amp for basic recording and practice. GT Player Express also plays standard audio files like AAC, MP3 and WAV, allowing you to learn and jam along with your favorite music at variable speeds. With Fast Track Pro and GT Player Express, your computer can be your entire guitar rig. * Ableton Live Lite 5 This special edition of the multi-award winning Ableton Live 5 software lets you experience what the critics have been raving about. Live 5's revolutionary loop-based paradigm makes production as simple as dragging and dropping audio clips in real time. You can also record linear tracks, add effects, perform live remixes and much more. -- SPECIFICATIONs -------------------------------- SAMPLE RATES - 48kHz sampling rate unless otherwise stated MIC. INPUT - (A/D) Input Impedance : 2.7k Ohms unbalanced 5.4k Ohms balanced Input Level : From +24dBu @ min gain, pad on to - - 40dBu @ max gain, no pad. Channel-to-Channel Crosstalk: < -110dB SNR : -101dB, A-weighted Dynamic Range : 101dB, A-weighted THD+N : 0.005% (-86dB) @ -1dBFS, 1kHz Frequency Response : 20Hz to 20kHz, +/- 0.1dB Pre-amp Gain : >40dB Pad : -20dB pad INSTRUMENT INPUTS- (A/D) Input Impedance : >220k Ohm, unbalanced Input Level : From +22dBV @ min gain, pad on to - 42dBV @ max gain no pad. SNR : -100dB, A-weighted Dynamic Range : 100dB, A-weighted THD+N : 0.005% (-86dB) @ -1dBFS, 1kHz Frequency Response : 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate. Pre-amp Gain : >40dB Pad : -20dB pad LINE OUTPUTS - (A/D) Input Impedance : 20k Ohms balanced and unbalanced Input Level : +4.1dBu balanced, +1.9dBV unbalanced Channel-to-Channel Crosstalk: < -110dB SNR : -101dB, A-weighted Dynamic Range : 101dB, A-weighted THD+N : 0.005% (-86dB) @ -1dBFS, 1kHz Frequency Response : 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate. 20Hz to 40kHz, +/- 0.1dB @ 96kHz sample rate. Pad : -20dB pad INPUT INSERTS- (analog) Max. Level Send : +6dBV, unbalanced Max. Level Return : +6dBV, unbalanced THD+N : 0.00281% (-91dB) @ -1dB from max level, 1kHz. Frequency Response : 20Hz to 40kHz, +/- 0.1dB LINE OUTPUTS - (D/A) Output Impedance : 150 Ohms unbalanced, 300 Ohms balanced Max. Output Level : +1.8dBV, unbalanced +10.1dBu, balanced Channel-to-Channel Crosstalk: < -108dB SNR : -103dB, A-weighted Dynamic Range : 103dB, A-weighted THD+N : 0.005% (-86dB) @ -1dBFS, 1kHz Frequency Response : 20Hz to 20kHz, +/- 0.3dB @ 48kHz sample rate. HEADPHONE OUTPUT- (D/A) Max Output : -2.5dBV at THD < 0.05% into 32 ohms Working Range : 32 to 600 ohms WITH DRIVERS - I/O Bit-Depth Sample Rate (kHz) 4 x 4 16 44.1/48 2 x 4 24 44.1/48 2-in or 2-out 24 88.2/96 COMPATIBILITY- WDM, ASIO 2, Core Audio REQUIREMENTS - PC : Pentium 3 500 MHz (higher speed CPU may be necessary for laptops). 256MB RAM DirectX 9.0c or higher Windows XP (SP2) (Windows 2000, 98, 98SE, ME & NT not supported) USB port MAC: Macintosh G3 600/G4 667MHz (higher speed may be necessary for laptops). 256MB RAM OS X 10.3.9/10.4.2 (earlier versions of Mac operating systems are not supported). USB port Dolby AC-3 and DTS pass-through with Apple DVD player NOTE: M-Audio suggests that you also check the minimum system requirements for your software, as they may greater than the above. G3/G4 accelerator cards not supported; native FireWire ports required. www.m-audio.com